Includes all of the components necessary to convert the 3M™ Vortex Cooling Assembly W-2862 to the 3M™ Vortex Cooling Assembly V-100.

The Vortemp assembly can warm compressed air by as much as 50°F (28°C). It can operate on pressures ranging from 60-95 psig, depending on hose length. The assembly includes the heater with quick disconnect fittings, waist belt and holder.

The Model V-100 Vortex Cooling Assembly cools incoming air up to 50 degrees F and allows the wearer to adjust the level of air flow.

The Vortex Cooling Assembly provides cool refreshing air to workers in high heat environments. Compressed air can be cooled as much as 50°F (28°C). It can operate on pressures ranging from 60-90 psig, depending on hose length. It includes the cooler with quick disconnect fitting, waist belt and holder.

Used with breathing tube, facepiece, filters/cartridges and air hose, it makes a 3M™ Dual Airline Supplied Air Respirator.

The Model V-200 Vortemp can warm incoming air up to 50 degrees and allows the wearer to adjust air flow. Both models require 60-90 psi, depending on the length of the hose used.

Used for continuous flow on 3M™ 6000/6000DIN and 7000 Series Full Facepieces.

This kit is used with the 3M™ Supplied Airline Hose W-3020 and the 3M™ 6000/6000DIN and 7000 Series Full Facepieces. Approved for use in continuous flow and pressure demand applications.

Enhance worker comfort by increasing or decreasing airline air temperature by 30°F.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

Model V-300 regulates the flow of compressed air and allows the user to set the air flow.

Model V-400 is a low-pressure connector assembly for use only with the 3M W-3020 low-pressure hose.

The system provides a portable source of ambient air for two workers. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

Respirator comes with a full facepiece and one or two emergency air cylinders for escape from conditions that are Immediately Dangerous to Life and Health (IDLH).

The system provides a portable source of ambient air for three workers. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The Full Mask Respirator is made of silicone rubber and will hold its shape in extreme hot and cold environments. Features a double-sealing flange, deep chin pocket, a replaceable, distortion-free polycarbonate lens with antifog, antiscratch coating and a comfortable, removable hairnet.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

A durable polyethylene outer shell with a double shroud is ideal for abrasive blasting applications.

The system provides a portable source of ambient air for one worker. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The Half Mask Respirator has a low profile. Features an over-the-shoulder hose, collar clip and adjustable belt.

The system provides a portable source of ambient air for one worker. System comes complete with comfortable, half facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for two workers. System comes complete with comfortable, half mask supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for three workers. System comes complete with comfortable, half mask supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides ambient air to one worker. Comes complete with Tyvek hood, hose, and an ambient air pump. The lightweight disposable hood is loose-fitting, making it especially comfortable for bearded workers.

The Maintenance-Free Tyvek Hood is designed with the breathing tube and head suspension completely integrated in a convenient one-piece disposable hood assembly.

The positive pressure of a Supplied Air Hood provides greater wearer protection than negative pressure and eliminates the need for fit testing. The lightweight hood provides a loose, comfortable fit and features a ratchet suspension that can be easily adjusted through the hood with a simple turn of the knob.

The disposable Poly-Coated DuPont Tyvek Hood is resistant to liquids and ideal for use with spray paint. It is designed with the breathing tube and head suspension integrated in a convenient one-piece disposable Hood Assembly.

The Maintenance-Free Double-Bib Tyvek Hood Assembly is designed with the breathing tube (with low-pressure flow adapter) and head suspension completely integrated in a convenient one-piece disposable hood assembly.

Required for connecting breathing air supply hose to respirator or to ambient air source.

3M™ High and Low Pressure Hoses include some of the hoses used on 3M™ Supplied Air Respirator Systems.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

These Air Supply Hoses are designed for use with breathing air compressors. Kit 4696 includes a rubber starter hose with a 3/8" ID and 1/4" Industrial Interchange, steel quick-disconnect coupler.

The four-unit Whitecap Supplied Air System allows the wearer to select from a variety of modular components to fit different job applications. Systems can be used for general purpose, welding or abrasive blasting. Also used to cool or heat the air for extra comfort.

The W-5114 Breathing Tube is used with 3M Supplied Air System H-Series Hoods.

The L-122 Breathing Tube is for use with any 3M™ L-Series Headgear.

Replacement parts for SA-2000 and SA-1000 airline systems.

The CF2007 Interchangeable Breathing Tube easily converts an air-purifying respirator into a continuous flow respirator.

3M™ Dual Airline, Supplied Air, Tight-Fitting Facepiece Systems Adapter Kits are used for many applications. The combination system allows switching between positive and negative pressure.

3M™ Dual Airline, Supplied Air, Tight-Fitting Facepiece Systems Adapter Kits are used for many applications. Options include high or low pressure, back or front mounting.

3M™ Dual Airline, Supplied Air, Tight-Fitting Facepiece Systems Adapter Kits are used for many applications. Options include high or low pressure, back or front mounting.

3M™ Dual Airline, Supplied Air, Tight-Fitting Facepiece Systems Adapter Kits are used for many applications. Options include high or low pressure, back or front mounting.

Includes all the components needed to convert the 3M™ 6000DIN and 7000 Series Full Facepieces to airline mode.