The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Retractable Web Lanyard allows flexibility of movement to and from an anchorage point without allowing slack in the lanyard, which could result in a long free fall.

The Retractable Web Lanyard allows flexibility of movement to and from an anchorage point without allowing slack in the lanyard, which may result in a long free fall.

This lightweight, self-retracting lanyard is ideal for when the user must use a lifting pole to reach a remote anchorage point.

The self-retracting MiniLite Fall Limiter is a compact lanyard with a quick activating brake system. Limits free falls.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The EZ Stop III Lanyard combines exceptional strength and ease of use into one safe and effective shock-absorbing lanyard.

The rugged FP5K carabiner gives the FP5K Tie-Back Shock-Absorbing Lanyard extreme strength.

The reliable Soft Pak component of this Energy Absorbing Lanyard has been tested and proven year after year to limit the energy of a fall to less than 900 lb.

Decelerator Energy Absorbing Lanyards have an energy-absorbing core that limits fall arrest forces to under 900 lb. A tough outer nylon or polyester tube jacket also acts as a back-up lanyard, while a warning flag provides a visual signal that the lanyard has been in a fall.

In a fall, the Decelerator will reduce the impact load experienced by the wearer, limiting the arresting forces to under 900 lbs.

In the event of a fall, this lanyard absorbs the energy released when the falling worker reaches the end of his lifeline, protecting him from harm.

The Manyard HP contains shock-absorbing inner core material surrounded by a super-strong tubular outer jacket.

EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this tie-back model that eliminates the need for a separate anchorage connector. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The 6’ Titan™ Shock-Absorbing Lanyard is constructed of lightweight, durable webbing with locking snap hook or rebar anchorage harness connections.

The Titan T-BAK Lanyard is a pack-type shock-absorbing lanyard designed for tie-back use.

Integral Shock-Absorbing Lanyards are 6’ long and made of a 1-3/8” tubular webbing which provides a break strength of over 6000 lb.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The Manyard II contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.